An orange status icon (see below) indicates that a specific event (motion, excess inclination, too low/high temperature) occurred during the last measurement. In such cases, the Senso4s PLUS automatically discards the measurement to prevent displaying faulty gas levels in the Senso4s app. No manual intervention is needed; the system will carry out the next measurement […]
Senso4s is a smart gas solution that consists of a gas level monitoring device Senso4s BASIC or PLUS and Senso4s mobile app for Android and iOS. For a comparison of the features available in Senso4s BASIC and PLUS, please refer to the following guide. The Senso4s device measures the gas level in your cylinder every 15 […]
The icon below indicates that Senso4s device’s battery level is low. You should replace the batteries as soon as possible.
The first requirement for a successful connection to your Senso4s device is that your device is listed as Available in Senso4s Scanner screen (i.e. the screen that shows when you open the Senso4s app). If that is not the case, please take the following steps: Refresh the list of Senso4s devices: Swipe down Senso4s Scanner […]
Senso4s mobile app is available in both Google Play Store and App Store. To use Senso4s app on your Android device, your device should run Android 8.0 or newer and be equipped with Bluetooth 4.0 or greater. To use Senso4s app on your iOS device, your device should run iOS version 15.0 or newer and be equipped with Bluetooth […]
An unsuccessful Senso4s device setup is indicated by the drawing shown below and a pop-up explaining what went wrong. In addition, the main drawing can be accompanied by one or more icons in the upper left corner of the screen: Motion detected: The Senso4s device moved during setup. Please make sure that the Senso4s device […]
