The first requirement for a successful connection to your Senso4s device is that your device is listed as Available in Senso4s Scanner screen (i.e. the screen that shows when you open the Senso4s app). If that is not the case, please take the following steps: Refresh the list of Senso4s devices: Swipe down Senso4s Scanner […]
Senso4s mobile app is available in both Google Play Store and App Store. To use Senso4s app on your Android device, your device should run Android 8.0 or newer and be equipped with Bluetooth 4.0 or greater. To use Senso4s app on your iOS device, your device should run iOS version 15.0 or newer and be equipped with Bluetooth […]
An unsuccessful Senso4s device setup is indicated by the drawing shown below and a pop-up explaining what went wrong. In addition, the main drawing can be accompanied by one or more icons in the upper left corner of the screen: Motion detected: The Senso4s device moved during setup. Please make sure that the Senso4s device […]
These are instructions for the initial setup of your Senso4s device and for subsequent first setups after a battery replacement. STEP 0: Once you are connected to your Senso4s device, tap the gas cylinder setup icon in the bottom-left corner of your device’s home screen. STEP 1: Remove everything from your Senso4s device and place […]
These are instructions for the setup of your Senso4s device if you want to replace your current gas cylinder with a new one. If you want to setup your device using refill option, please follow the following guide. STEP 0: Once you are connected to your Senso4s device, tap the gas cylinder setup icon in […]
These are instructions for the setup of your Senso4s device if you want to use refilled gas cylinder. If you want to setup your device using a new gas cylinder, please check the following guide. STEP 0: Once you are connected to your Senso4s device, tap the gas cylinder setup icon in the bottom-left corner […]
