If the total weight of the equipment attached to your Senso4s device exceeds 2.5 kg, add this extra equipment mass to the “Empty cylinder weight” (tare weight) during the setup process.
If your gas cylinder is not full during a new setup, simply add the total weight of any attached equipment to the “Empty cylinder weight” (tare weight) during the setup process.
Nothing changes immediately. Measurements are taken every 15 minutes, so you have a short window to put the cylinder back on before the next measurement cycle. However, if the Senso4s device is empty during the next measurement, it will record a value of 0 kg. Putting the bottle back on after this measurement will not […]
An orange status icon (see below) indicates that a specific event (motion, excess inclination, too low/high temperature) occurred during the last measurement. In such cases, the Senso4s PLUS automatically discards the measurement to prevent displaying faulty gas levels in the Senso4s app. No manual intervention is needed; the system will carry out the next measurement […]
Senso4s is a smart gas solution that consists of a gas level monitoring device Senso4s BASIC or PLUS and Senso4s mobile app for Android and iOS. For a comparison of the features available in Senso4s BASIC and PLUS, please refer to the following guide. The Senso4s device measures the gas level in your cylinder every 15 […]
The icon below indicates that Senso4s device’s battery level is low. You should replace the batteries as soon as possible.
